Rotary Sanders

• Uses 16″ (41cm) diameter sanding discs with optional sandpaper adapter
• Optional dust control system coupled with any standard shop vacuum greatly reduces dust issues
• Powerful 1½ HP motor rotates the pad driver at 175rpm
• ‘Wiper’ switch keeps motor contacts clean in dusty applications
• Easy release handle clamp can be hand or foot operated
• Changing accessories is simple with the three tab driver hub
• Vacuum-ready dust pipe (RS-16dc only) accepts 1½ vacuum hose to connect to most dust containment systems
• Full range of 16″ sanding discs available from 16 to 120 grit, along with pads and sanding screens
• Other accessories available include the EZ Scrape for paint and glue removal from smooth concrete, Grind-A-Way for concrete grinding as well as carpet and floor scrubbing brushes of various textures and grades

Handle Positioning:   Simply stand behind the machine with your arms relaxed in front of you. Match the handle height to that of your hands and lock the handle clamp in place. Running the machine can be a bit tricky for the first time user, so it’s best to use a white floor maintenance pad (less torque on the machine) to get used to the feel. The operator should be able to move the machine left, right, forward or reverse with minimal effort, while lifting up or pushing down slightly on the handles, which becomes effortless in a matter of seconds.

Other Uses:  There are numerous circumstances where the removal of products from flooring is required. Floor machines, also known as Rotary Sanders, in most cases, can tackle most problems related to these situations. When drum sanders are used on concrete floors, the problem of material such as paint or glue build-up on the sanding sheets is often one that results in unnecessary cost and frustration. Using the RS-16 with the EZ-Scrape attachment, for instance, makes paint removal a breeze. Not only is dust minimized, but costs are reduced because no sandpaper is used and the job gets done faster. These floor machines are often rented out for sanding floors, screening between coats of finish, polishing tile floors, treating granite and marble, scrubbing carpet and tile, applying waxes and the list goes on. Grinding concrete with 2 x 2 x 4″ rubbing blocks is another task performed by the RS-16 series machines. The possibilities are really too numerous to mention. Every rental yard should carry at least one in their fleet.

• • • Blow compressed air through the motor and handle housings so once in awhile, as these machines are often used under extremely dusty conditions.
    • Upon return, inspect the power cord for defects. These machines can be driven over cables.
    • Check accessories such as pad drivers, for damage which may be caused by running the machine hard into walls, or signs of premature wear, which can occur when operators run the pad driver without floor pads in place.
    • When transporting or storing the machine, it’s advisable to remove any accessories from the drive hub.

Click here to view the EZ Scrape floor coatings removal attachment

Click here to view dust control with vacuum system

Parts List Dated 01-2006